Shars 3 X 2.95" Lockdown CNC Milling Machine Vise W/ Base + Certificate New R[

• Popularity - 30311 views, 4330.1 views per day, 7 days on eBay. Super high amount of views. 348 sold.
• Price - Avg: $0.00, Low: $0.00, High: $0.00. Best quality when compared to PicClick similar items.
• Seller - + items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

Shars 3 x 2.95" Lockdown CNC Milling Machine Vise w/ Base + Certificate New<br>USE ON NC/CNC MACHINES FOR CUSTOMER WHO ONLY NEEDS ONE VISE NOT TWO OR MORE, BECAUSE OF BED HEIGHT TOLERANCE , THESE VISES CAN'T BE USED TOGETHER.<br>Comes with certificate<br>Product Code<br>202-1018<br>Product description<br>Dimensions Jaw Width: 3"<br>Jaw Opening: 2.95"<br>Jaw Height: 1"<br>Bed Height: 1.82"<br>Weight: 35 Lbs<br>Accurate to<br>0.002”<br>per 4” on squareness and<br>0.006”<br>per 4” on parallelism without base and<br>0.008”<br>per 4” on parallelism with base<br>Vise Key: 11.11mm table slot width, 12.00mm base width<br>Product features<br>Each pound of force in horizontal induces 1/2 lb of downward force, eliminating jaw tilt.<br>This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward. The workplace does not move up, even if it is held at the top of the jaw plates.<br>Highest clamping power. It's very accurate and durable<br>Sliding surface of the vise bed is flame hardened and ground<br>Vise bed is made from grey cast iron and the maximum tensile strength of the vise bed is 28,000 PSI<br>With anti-jaw lifting mechanism.<br>K type angle lock nut is made from the highest quality ductile Iron, firm and durable<br>Acme screws and easy to read 0-360 deg scales<br>4 screws from the top through the jaw reduce key's side force and make the vise body not easy to broke, extend vise life.<br>Taiwan new type<br>Four setting positions of the jaw plates are available, widening the jaw plates opening.<br>Four ways to use the vise, shows on the following fig.<br>Product includes<br>Swivel base<br>Product application<br>According to the table,<br>when A and C are unequal to E, you can swivel the vise base to suitable angle,<br>then the vise can be installed onto the Mill.<br>Vise Key: 11.11mm table slot width, 12.00mm base width<br>We have other vises available at<br>My Ebay Store<br>:<br>SHARS 4" 440V Milling Vise +/-0.0004<br>4" wide jaw plate, 4" inner jaw opening, 10" outer jaw opening<br>Made from 80,000PSI stress relief cast iron<br>Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc<br>Bed height Tolerance 2.25" +/-0.0005"<br>Clamping repeatability +/-0.0004"<br>Lifetime limited warranty<br>To learn more,<br>click here to 202-0991<br>SHARS 6" 690V Milling Vise +/-0.0004<br>6" wide jaw plate, 8.95" inner jaw opening, 17" outer jaw opening<br>Made from 80,000PSI stress relief cast iron<br>Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc<br>Bed height Tolerance 2.875" +/-0.0005"<br>Clamping repeatability +/-0.0004"<br>Lifetime limited warranty<br>To learn more,<br>click here to 202-0994<br>SHARS 6" 660U Milling Vise +/-0.0004<br>6" wide jaw plate, 6.25" inner jaw opening, 15" outer jaw opening<br>Single piece of stationary jaw and vise body to enhance clamping rigidness and accuracy<br>Made from 80,000PSI stress relief cast iron<br>Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc<br>Bed height Tolerance 3.189" +/-0.0005"<br>Clamping repeatability +/-0.0004"<br>Lifetime limited warranty<br>To learn more,<br>click here to 202-0995<br>SHARS 6" 600DS Double Station Milling Vise +/-0.0002<br>6" wide jaw plate<br>4.9" jaw opening in double station, 12" jaw opening in single station (conversion kit included)<br>Unique leadscrew design to allow to clamp either same sized or dissimilar sized parts<br>Jaw lift prevention mechanism by eccentric pin design<br>Made from 80,000PSI stress relief cast iron<br>Vise bed hardened to 45 HRc and jaw plate hardene